What are the instructions for making a raised garden?
Step 1: Place your boards in the correct position. The boards are arranged on a level area of ground so that their inner corners touch. Put one long board on its side and, use a rubber mallet, hammer two pieces of rebar one foot from each corner, a few inches deep into the ground.
Step 2: Make the short sides longer.
For temporary support, place a piece of rebar in the center of each. Next, raise the second long side and align it as necessary. Then hammer rebar about one foot from the corners of the second long side.
Step 3: Make sure the frame is secure.
Rebar the short sides a few inches deep and a foot from the corners, and remove the temporary supports. Install two pieces of rebar 2 feet apart along each long side. In this way, the frame will be reinforced when filled with soil.
Step 4: Fill your bed.
Cover the bottom of the frame with newspaper or cardboard and wet it. Last but not least, fill your bed with soil up to a few inches from the top.